milwaukeetool

Punta a gradini in ossido nero n.9 da 7/8" - 1-1/8" (2 gradini)

Punta a gradini in ossido nero n.9 da 7/8" - 1-1/8" (2 gradini) - Main image
7/8 in. - 1-1/8 in. #9 Black Oxide Step Drill Bit (2-Steps)7/8 in. - 1-1/8 in. #9 Black Oxide Step Drill Bit (2-Steps)7/8 in. - 1-1/8 in. #9 Black Oxide Step Drill Bit (2-Steps)7/8 in. - 1-1/8 in. #9 Black Oxide Step Drill Bit (2-Steps)7/8 in. - 1-1/8 in. #9 Black Oxide Step Drill Bit (2-Steps)
$8.99 In stock

Category: Saldi di Liquidazione dal Magazzino

descrizione: Le punte a gradino Milwaukee con prestazioni JAM-FREE sono ottimizzate per trapani a batteria ad alta velocità. Grazie al design a doppia scanalatura, offrono tempi di foratura fino a 2 volte più rapidi, una durata fino a 4 volte superiore e fino al 50% in più di fori per carica della batteria rispetto alla concorrenza. Ideali per forare fori di piccolo e grande diametro in acciaio e plastica. La punta Rapid Strike consente un avvio rapido e preciso, generando meno calore e prolungando la vita della punta. Il rivestimento in ossido nero migliora inoltre la durata, la qualità del foro e la vita utile della punta. Per praticità e precisione, ogni punta presenta segni di riferimento incisi al laser, visibili durante la foratura.profondità: 2,125

Customer Reviews (4.7 / 5 · 54 reviews)

Benjamin K. ★★★★★

That dual-flute design really does cut through metal clean and fast; I had my hole done in no time. First step drilled perfectly clean and the black oxide finish still looks new after several uses.

Timothy ★★★★★

I've been drilling through some fairly thick steel brackets and this step bit cut through cleanly without grabbing or jamming, even on my lower-torque drill. The black oxide coating still looks fresh after a dozen holes, and the dual-flute design really does clear chips fast. Exactly what I needed for quick work without swapping bits.

Chloe ★★★★★

Used it to enlarge some holes in a metal electrical box and it cut through cleanly without binding. The dual-flute design really does help it work fast with my cordless drill.

Daniel ★★★★★

Cut through this thick steel cabinet like butter with my cordless drill, and the dual-flute design definitely cleared chips fast without jamming once. Noticed a real improvement in how smooth the hole edges were compared to my old bits.

Lily ★★★★★

The black oxide finish on this step bit definitely helped it bite into the metal without wandering. I used it for some electrical panel work and the two steps cut cleanly without grabbing. Drilled through about 20 holes in 16-gauge steel and it's still sharp.

Scarlett B. ★★★★★

Used it on 14-gauge steel and the dual-flute design really made the hole come out clean—no binding or chattering at all. The 2-step sizing is handy for fast transitions between 7/8 and 1-1/8 inches.

Steven ★★★★★

Cut through 16-gauge steel roofing panels like butter with my cordless drill — the dual-flute design really does make for noticeably faster hole punching. No grabbing or chatter, even on the larger step.

Joshua ★★★★★

Finally got this step bit for my cordless drill and the dual-flute design really lives up to the faster hole cutting—drilled through 1/8 sheet metal without any grabbing or chatter.

Robert L. ★★★★★

The dual-flute design actually made a noticeable difference when I drilled through some thicker metal—it cut faster than my old bits and didn't bind up once. The black oxide finish seems solid so far, no rust after a few uses in my damp garage.

Ryan ★★★★★

Punched through a 1/8-inch steel bracket without even bogging down my drill — the dual-flute design really does clear the chips fast and clean. That black oxide coating hasn't shown a hint of wear yet after a dozen holes.