milwaukeetool

7/8 pulg. - 1-1/8 pulg. #9 Broca Escalonada de Óxido Negro (2 Pasos)

7/8 pulg. - 1-1/8 pulg. #9 Broca Escalonada de Óxido Negro (2 Pasos) - Main image
7/8 in. - 1-1/8 in. #9 Black Oxide Step Drill Bit (2-Steps)7/8 in. - 1-1/8 in. #9 Black Oxide Step Drill Bit (2-Steps)7/8 in. - 1-1/8 in. #9 Black Oxide Step Drill Bit (2-Steps)7/8 in. - 1-1/8 in. #9 Black Oxide Step Drill Bit (2-Steps)7/8 in. - 1-1/8 in. #9 Black Oxide Step Drill Bit (2-Steps)
$8.99 In stock

Category: Venta de Liquidación de Fábrica

descripción: Las brocas escalonadas Milwaukee con rendimiento sin atascos están optimizadas para taladros inalámbricos de alta velocidad. Con un diseño de doble flauta que ofrece hasta 2 veces más velocidad de perforación, hasta 4 veces más vida útil y hasta un 50% más de agujeros por carga de batería que la competencia. Ideales para perforar agujeros de diámetro grande y pequeño en acero y plástico. La punta Rapid Strike permite arranques rápidos y precisos que generan menos calor, lo que prolonga la vida útil de la punta de la broca. El recubrimiento de óxido negro también mejora la durabilidad, la calidad de perforación y la vida útil de la broca. Para comodidad y precisión del usuario, cada broca tiene marcas de referencia grabadas con láser que se pueden ver mientras se perfora.profundidad: 2.125

Customer Reviews (4.7 / 5 · 54 reviews)

Benjamin K. ★★★★★

That dual-flute design really does cut through metal clean and fast; I had my hole done in no time. First step drilled perfectly clean and the black oxide finish still looks new after several uses.

Timothy ★★★★★

I've been drilling through some fairly thick steel brackets and this step bit cut through cleanly without grabbing or jamming, even on my lower-torque drill. The black oxide coating still looks fresh after a dozen holes, and the dual-flute design really does clear chips fast. Exactly what I needed for quick work without swapping bits.

Chloe ★★★★★

Used it to enlarge some holes in a metal electrical box and it cut through cleanly without binding. The dual-flute design really does help it work fast with my cordless drill.

Daniel ★★★★★

Cut through this thick steel cabinet like butter with my cordless drill, and the dual-flute design definitely cleared chips fast without jamming once. Noticed a real improvement in how smooth the hole edges were compared to my old bits.

Lily ★★★★★

The black oxide finish on this step bit definitely helped it bite into the metal without wandering. I used it for some electrical panel work and the two steps cut cleanly without grabbing. Drilled through about 20 holes in 16-gauge steel and it's still sharp.

Scarlett B. ★★★★★

Used it on 14-gauge steel and the dual-flute design really made the hole come out clean—no binding or chattering at all. The 2-step sizing is handy for fast transitions between 7/8 and 1-1/8 inches.

Steven ★★★★★

Cut through 16-gauge steel roofing panels like butter with my cordless drill — the dual-flute design really does make for noticeably faster hole punching. No grabbing or chatter, even on the larger step.

Joshua ★★★★★

Finally got this step bit for my cordless drill and the dual-flute design really lives up to the faster hole cutting—drilled through 1/8 sheet metal without any grabbing or chatter.

Robert L. ★★★★★

The dual-flute design actually made a noticeable difference when I drilled through some thicker metal—it cut faster than my old bits and didn't bind up once. The black oxide finish seems solid so far, no rust after a few uses in my damp garage.

Ryan ★★★★★

Punched through a 1/8-inch steel bracket without even bogging down my drill — the dual-flute design really does clear the chips fast and clean. That black oxide coating hasn't shown a hint of wear yet after a dozen holes.